No photograph yet
Ambrogio

Ambrogio 4.0 Elite 4WD

The Ambrogio 4.0 Elite 4WD is an extreme-slope articulated robotic mower manufactured in Italy by ZCS. Featuring 4 electrically driven traction wheels and a jointed central chassis, it maintains severe banks and hillside lawns with gradients up to 60% (31°).

Lawn-area rating
3,200 m²
Max slope
60%
Cutting width
250 mm
Zones
Up to 8
€4,250

Price recorded 28 August 2026. Shops change prices often — check the current figure before buying.

View on the manufacturer’s site

We have no affiliate arrangement for this model, so this link earns us nothing.

Specifications last verified 28 August 2026

Where this information comes from

Garden Robot Atlas has not physically tested this mower. Everything below is based on the manufacturer's published specifications, with the source documents linked at the bottom of the page.

Is it right for your garden?

Each judgement below is derived from a published figure. Where the manufacturer has not published one, we say so instead of guessing.

Lawn size
Recommended: 3,200 m²

The manufacturer publishes 3,200 m² as the recommended lawn area. Read the linked source for its test conditions and check that your slopes, layout and available mowing hours are comparable.

Slopes
Very steep slopes

Rated for gradients up to 60% (about 31°). Measure your steepest section before deciding — a bank that exceeds the rating is outside the published operating limit; performance and safety are not warranted.

Trees and overhead cover
Boundary does not rely on satellites

The perimeter signal comes from a boundary wire, so defining the mowing area does not depend on satellite reception. Route planning, obstacle handling and any guide wire requirements remain model-specific.

Separate areas
Up to 8 zones

Separate areas — a front and back lawn, for example — can be mapped as distinct zones. Check whether the mower can drive between them on its own or needs carrying.

Installation
Boundary wire required

A perimeter wire must be installed as the model manual specifies. Installed cost, cable maintenance, signal behaviour and the effort of changing the layout vary by system.

Who it suits

Extreme steep inclines up to 60%, heavy duty tall grass, and demanding mountainous properties.

Limitations to know about

Requires boundary cable installation. Premium commercial price bracket.

Full published specifications

Rows marked “not published” are values the manufacturer does not state.

Published specifications for Ambrogio 4.0 Elite 4WD
Model identity
Model family Not published
Generation Not published
SKU / product code Not published
Model year 2024
Lifecycle Not confirmed
Confirmed replacement Not published
Coverage
Manufacturer-recommended lawn area 3,200 m²
Maximum slope 60% (about 31°)
Navigation
Navigation system Perimeter boundary wire; Spiral, SDM and +Infinity cutting methods (with Power Unit PREMIUM)
RTK setup Not published
Drive configuration Not published
RTK satellite No
LiDAR Not published
Camera / vision Not published
GPS / GNSS Yes
Boundary wire required Yes
Virtual boundaries Not published
Multiple zones Yes
Maximum zones 8
Obstacle avoidance Collision bumper sensor: stops and changes direction on impact
Cutting
Cutting width 250 mm
Cutting height 30–75 mm
Cutting system Solid 4-point star blade; motorised cutting-height adjustment
Power
Runtime 3 h 15 min
Charging time 1 h 30 min
Battery Li-ion, 25.9 V, 10.35 Ah (260 Wh) — Power Unit PREMIUM
Protection
Rain sensor Yes
IP rating IPX5 (robot); pressure-washing forbidden by manufacturer
Connectivity
Wi-Fi Not published
Bluetooth Yes
4G / cellular Yes
App Ambrogio Remote App
Anti-theft Geofence alert, GPS tracking, PIN security
Practical
Weight 15.5 kg
Dimensions 474 × 695 × 358 mm (manufacturer: L × D × H)
Warranty Up to 6 years conditional warranty
Availability Available
Package and accessories
Included Not published
Required but not included Not published
Optional Not published

Where these specifications come from

  1. Ambrogio 4.0 Elite 4WD Official Specifications — Official manufacturer page, link checked 28 Sep 2026
  2. Ambrogio 4.0 Series Technical Manual — Official product manual, link checked 21 Sep 2026

Specifications last verified: 28 August 2026. Found something out of date? Tell us and we will fix it.

Alternatives to consider

Models with a comparable rated working area.