Husqvarna Automower 430X NERA
The Husqvarna Automower 430X NERA is a high-capacity robotic mower for properties up to 3,200 m². Supported by Husqvarna's EPOS plug-in module, it offers precision satellite virtual boundaries with 2–3 cm accuracy alongside on-board radar obstacle avoidance.
- Lawn-area rating
- 3,200 m²
- Max slope
- 50%
- Cutting width
- 240 mm
- Zones
- Multiple
We have no affiliate arrangement for this model, so this link earns us nothing.
Specifications last verified 28 August 2026
Garden Robot Atlas has not physically tested this mower. Everything below is based on the manufacturer's published specifications, with the source documents linked at the bottom of the page.
Is it right for your garden?
Each judgement below is derived from a published figure. Where the manufacturer has not published one, we say so instead of guessing.
The manufacturer publishes a lawn-area rating of 3,200 m². The source must be checked to determine whether it is a recommended or maximum figure and which operating conditions apply.
Rated for gradients up to 50% (about 27°). Measure your steepest section before deciding — a bank that exceeds the rating is outside the published operating limit; performance and safety are not warranted.
RTK correction source and fallback behaviour vary by model. Check the manual for coverage requirements under mature trees and beside tall buildings.
Separate areas — a front and back lawn, for example — can be mapped as distinct zones. Check whether the mower can drive between them on its own or needs carrying.
Boundaries are set in the app rather than with a buried cable, so the layout can be changed at any time without digging.
Who it suits
Large lawns up to 3,200 m² with slopes up to 50% wanting premium Swedish engineering and cable-free boundary flexibility.
Limitations to know about
Wire-free operation requires purchasing the optional Husqvarna EPOS Plug-in Kit and Reference Station.
Full published specifications
Rows marked “not published” are values the manufacturer does not state.
| Model identity | |
|---|---|
| Model family | Not published |
| Generation | Not published |
| SKU / product code | Not published |
| Model year | 2024 |
| Lifecycle | Not confirmed |
| Confirmed replacement | Not published |
| Coverage | |
| Manufacturer-published lawn-area rating | 3,200 m² |
| Maximum slope | 50% (about 27°) |
| Navigation | |
| Navigation system | EPOS RTK Satellite Navigation (wire-free with plug-in accessory) or Boundary Wire |
| RTK setup | Not published |
| Drive configuration | Not published |
| RTK satellite | Yes |
| LiDAR | No |
| Camera / vision | No |
| GPS / GNSS | Yes |
| Boundary wire required | No |
| Virtual boundaries | Yes |
| Multiple zones | Yes |
| Maximum zones | Not published |
| Obstacle avoidance | Radar sensor technology for intelligent obstacle detection and slowdown |
| Cutting | |
| Cutting width | 240 mm |
| Cutting height | 20–60 mm |
| Cutting system | Cutting disc with 3 pivoting blades; electric height adjustment |
| Power | |
| Runtime | 1 h 40 min |
| Charging time | 40 min |
| Battery | Not published |
| Protection | |
| Rain sensor | Not published |
| IP rating | IPX5 (hose washable) |
| Connectivity | |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| 4G / cellular | Yes |
| App | Automower Connect App |
| Anti-theft | Not published |
| Practical | |
| Weight | 14.6 kg |
| Dimensions | 750 × 540 × 280 mm |
| Warranty | Not published |
| Availability | Discontinued |
| Package and accessories | |
| Included | Not published |
| Required but not included | Not published |
| Optional | Not published |
Where these specifications come from
- Automower 430X NERA Official Product Page — Official manufacturer page, link checked 28 Sep 2026
- Automower 430X NERA Operator Manual — Official product manual, link checked 21 Sep 2026
Alternatives to consider
Models with a comparable rated working area.