Mammotion LUBA 3 AWD 5000
The Mammotion LUBA 3 AWD 5000 is the largest published LUBA 3 EU variant, rated for lawns up to 5,000 m². It combines AWD with 360° LiDAR, dual-camera AI vision and Network RTK for wire-free multi-zone mowing.
- Lawn-area rating
- 5,000 m²
- Max slope
- 80%
- Cutting width
- 400 mm
- Zones
- Up to 50
We have no affiliate arrangement for this model, so this link earns us nothing.
Specifications last verified 27 August 2026
Garden Robot Atlas has not physically tested this mower. Everything below is based on the manufacturer's published specifications, with the source documents linked at the bottom of the page.
Is it right for your garden?
Each judgement below is derived from a published figure. Where the manufacturer has not published one, we say so instead of guessing.
The manufacturer publishes a lawn-area rating of 5,000 m². The source must be checked to determine whether it is a recommended or maximum figure and which operating conditions apply.
Rated for gradients up to 80% (about 39°). Measure your steepest section before deciding — a bank that exceeds the rating is outside the published operating limit; performance and safety are not warranted.
The published navigation description includes a non-satellite positioning method. Check the manual for the model-specific canopy and obstacle limits.
Separate areas — a front and back lawn, for example — can be mapped as distinct zones. Check whether the mower can drive between them on its own or needs carrying.
Boundaries are set in the app rather than with a buried cable, so the layout can be changed at any time without digging.
Who it suits
Very large, complex or steep properties within the published 5,000 m² rating that need up to 50 mapped mowing zones.
Limitations to know about
Network RTK depends on suitable Wi-Fi or 4G service. The product page quotes up to 215 minutes for the series rather than clearly assigning it to every variant, so this record leaves runtime unknown.
Full published specifications
Rows marked “not published” are values the manufacturer does not state.
| Model identity | |
|---|---|
| Model family | LUBA |
| Generation | LUBA 3 |
| SKU / product code | Not published |
| Model year | 2026 |
| Lifecycle | Current model |
| Confirmed replacement | Not published |
| Coverage | |
| Manufacturer-published lawn-area rating | 5,000 m² |
| Maximum slope | 80% (about 39°) |
| Navigation | |
| Navigation system | Tri-Fusion positioning: 360° LiDAR + dual-camera AI vision + NetRTK |
| RTK setup | Mammotion iNavi Network RTK; no physical antenna required |
| Drive configuration | All-wheel drive (AWD) |
| RTK satellite | Yes |
| LiDAR | Yes |
| Camera / vision | Yes |
| GPS / GNSS | Yes |
| Boundary wire required | No |
| Virtual boundaries | Yes |
| Multiple zones | Yes |
| Maximum zones | 50 |
| Obstacle avoidance | 360° LiDAR + dual-camera AI recognition and anti-fall protection |
| Cutting | |
| Cutting width | 400 mm |
| Cutting height | 25–70 mm |
| Cutting system | 400 mm dual-disc system with two 165 W cutting motors and six-blade discs |
| Power | |
| Runtime | Not published |
| Charging time | Not published |
| Battery | Not published |
| Protection | |
| Rain sensor | Not published |
| IP rating | Not published |
| Connectivity | |
| Wi-Fi | Yes |
| Bluetooth | Not published |
| 4G / cellular | Yes |
| App | Mammotion app; Alexa and Google Assistant support |
| Anti-theft | Not published |
| Practical | |
| Weight | Not published |
| Dimensions | Not published |
| Warranty | 3 years |
| Availability | Not recently checked |
| Package and accessories | |
| Included | LUBA 3 AWD mower; Extra set of blades; Charging station; Charging-station power supply |
| Required but not included | No perimeter wire or physical RTK antenna required; iNavi uses lawn-wide Wi-Fi or 4G connectivity. |
| Optional | Robot mower garage; Mower cleaning stand; Endurance replacement blades |
Where these specifications come from
- Mammotion EU LUBA 3 AWD Official Product Page — Official manufacturer page, link checked 21 Sep 2026
- Mammotion EU LUBA 3 SKU and Feature Overview — Official technical documentation, link checked 21 Sep 2026
Alternatives to consider
Models with a comparable rated working area.